Metal Cladding - Coatings

PHONE 01380 831299 FOR BEST PRICES

Noxyde is a waterborne anti-corrosion coating for roofing and metal cladding and is generally spray applied. Manufactured by Rust-Oleum Mathys.

Noxyde has been the world leader in corrosion control since 1972.

Corrosion protection by elastomeric membrane

A rust preventive coating, single component and really easy to apply. The coating forms a rubbery anti-rust membrance which is impermeable to water and highly resistant to weathering, mechanical and chemical attack.

High quality anti-corrosive pigments - Galvanic protection against corrosion
Fully waterproof - Moisture does not penetrate through
Extreme elasticity (>200%) - Does not crack or peel
Superb adhesion - Prevents rust from spreading
Excellent edge coverage - Protects areas that are subject to more abuse
Minimal surface preparation - Reduces downtime and costs

Use for ALL steel structures
Apply by spray application for cladding, although can be applied by brush or roller for roofs.
Excellent protection at corners and outside edges.
800 g/m2
DFT 350 microns
1 or 2 coats required
In addition to cladding use for metal roofs, steel bridges, tank exteriors, lighthouses, harbour cranes and ALL steel structures.

Non standard colours by request
Noxyde was tested by many institutes and all results found are phenomenal: "unsurpassed corrosion control".

Phone 01380 831299 for data and COSHH sheets

PHONE 01380 831299 FOR BEST PRICES

Universal waterborne anti-corrosion coating for metal cladding, brushable. Manufactured by Rust-Oleum Mathys.

Peganox is a brushable version of Noxyde, the world leader in corrosion control since 1972.

Peganox can also be sprayed but also consider NOXYDE for spray application

Corrosion protection by elastomeric membrane

A rust preventive coating, single component and really easy to apply. The coating forms a rubbery anti-rust membrance which is impermeable to water and highly resistant to weathering, mechanical and chemical attack.

High quality anti-corrosive pigments - Galvanic protection against corrosion
Fully waterproof - Moisture does not penetrate through
Extreme elasticity (>200%) - Does not crack or peel
Superb adhesion - Prevents rust from spreading
Excellent edge coverage - Protects areas that are subject to more abuse
Minimal surface preparation - Reduces downtime and costs

Use for ALL steel structures
Apply by brush or roller
Coverage 400 gm/sq m
DFT 150 microns
2 coats required
Non standard colours by request
Noxyde was tested by many institutes and all results found are phenomenal: "unsurpassed corrosion control".

Phone 01380 831299 for data and COSHH sheets

PHONE 01380 831299 FOR BEST PRICES

Peganox is a primer and topcoat in one and can be applied directly on various metallic substrates. Manufactured by Rust-Oleum Mathys.

Primer and topcoat in one
Durable corrosion protection
Easy to apply by brush, roller or airless spray
Can be applied in damp weather at temperatures down to minus 5 degrees C
Can be applied to moist substrates - for instance pipelines with outside condensation
No cracking due to long lasting elasticity
Can be applied to most types of metal, including steel, galvanized steel, aluminum, zinc, etc
Rust need to be removed by scraping and wire brushing (St3) or grit blasting (Sa2).
Can be applied on top of previous, good adhering paint systems
Dry to touch in 3 - 4 hours (20 degrees C and 60% RH) and can be recoated after 24 hours
Colours: grey green, beige grey, english red
Available in 20 litre and 5 litre

Phone 01380 831299 for data and COSHH sheets