Anti-Slip Coatings

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

High Build Epoxy Coating with aggregate as a slip deterent
2 pack heavy duty, high build epoxy resin coating
Solvent free, 100% solids formulation, non taint
Chemically resistant
Good standard colour range. Custom colours to special order
Use FS EpoxyCoat for first coat or prime with FS EpoxyPrime, FS EpoxySeal or FS Epoxy DPM/Primer.
One coat sufficient if overcoating existing epoxy.
See suggested systems at bottom of page.
Three different aggregates can be supplied, either aluminium oxide, coarse bauxite, or fine flint. Aluminium oxide should be used for a good compromise between slip resistance and cleanability. Should you require a higher level of slip resistance use coarse bauxite, or for less slip resistance use fine flint.
Aggregates can also be supplied in bulk quantities for you to measure out yourself - this saves us time and packing and therefore works out cheaper
COSHH sheets on request
Data Sheet - FS EpoxyCoat Anti-Slip
Click here for Colour Chart for FS EpoxyCoat Anti-Slip

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

Fast Cure version of FS EpoxyCoat Anti-Slip - Apply two coats in one day
2 pack heavy duty, high build epoxy resin coating
Solvent free, 100% solids formulation, non taint
Chemically resistant
Good standard colour range. Custom colours to special order
Use FS EpoxyCoat FastCure for first coat or prime with FS EpoxyPrime FastCure or FS Epoxy DPM/Primer.
One coat sufficient if overcoating existing epoxy.
See suggested systems at bottom of page.
Three different aggregates can be supplied, either aluminium oxide, course bauxite, or fine flint. Aluminium oxide should be used for a good compromise between slip resistance and cleanability. Should you require a higher level of slip resistance use course bauxite, or for less slip resistance use fine flint.
Aggregates can also be supplied in bulk quantities for you to measure out yourself - this saves us time and packing and therefore works out cheaper
COSHH sheets on request
Data Sheet - FS EpoxyCoat Anti-Slip FastCure
Click here for Colour Chart for FS EpoxyCoat Anti-Slip FastCure

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

A slip resistant version of Concrete Floor Paint
Pre-blended anti-slip aggregate produces an attractive, evenly textured finish.
One unit covers up to 40 square metres
Two coats recommended
Four colours available
COSHH sheets on request
Data Sheet - Anglo Concrete Floor Paint - Slip Resistant Grade

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

Anti-slip surface for increased safety
Single pack, solvent based anti-slip coating
For foot traffic, enterior and exterior
Anit-slip additive is premixed in the coating
For use on old concrete (>2 years), metal and wood
Touch dry after 6 hours
Coverage: up to 8 square metres per litre

COSHH sheets on request
Data Sheet - Rust-Oleum 7100NS Anti-slip Coating