Step-to-Safety Anti-Slip Treads, Nosings, Plate, Timbergrip

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

· Easy to install
· Effective anti slip surface
· Durable & long-lasting
· Corrosion resistant
· Low maintenance

Quartzgrip™ Anti Slip Stair Tread Covers are designed to fit existing timber, concrete or steel chequer plate steps. Over time conventional steps become worn, polished, damaged, corroded and slippery due to a variety of environmental and usage factors.
Quartzgrip™ Anti Slip Stair Tread Covers are easy to install and provide an attractive fresh look to existing steps.
Quartzgrip™ Anti Slip Stair Tread Covers are available in black with yellow nosing, as standard. This high visibility nosing provides an effective contrast and highlights the leading edge of the step, assisting the partially sighted, and improving safety standards in low light areas.
Alternatively safety yellow or stone grey covers are available from stock. Bespoke tread covers are available in all RAL & BS colours upon request, to compliment your corporate image.
Unlike proprietary resin systems which require time to cure, these pre-formed glass reinforced plastic stair tread covers are quick and easy to install; Surface preparation is minimal, simply glue or screw into place and the stairs are ready to walk on, reducing down-time.
Quartzgrip™ Anti Slip Stair Tread Covers are 4mm thick with a 40mm drop nose
A cutting service is available. Simple cuts may be f.o.c. A written order (by email, post or fax) is essential before we will undertake any cuts.

The following fixings are available:
External adhesive: 310ml tube @ £5.85 each
M4.8mm x 35mm wood screws @ £19.50 per 100
Screws & plugs for concrete @ £23.40 per 100
Self tapping screws: No 8 x 20mm to suit Chequer Plate @ £26.00 per 100
Domed head bolts & fixing plates to suit open mesh grating @ £1.95 each
Drilling & countersinking @ £0.33 per hole


Quartzgrip™ Anti Slip Stair Nosing provides a low-cost alternative to our stair tread covers. Available in safety yellow as standard, the stair nosing is manufactured from durable glass reinforced plastic, with a gritted anti-slip surface. All Nosing are 70mm wide, with a chamfered back edge and 40mm drop nosing.
See separate entry

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

· Easy to install
· Durable & long-lasting
· Corrosion resistant
· Low maintenance

Unlike proprietary resin systems which require time to cure, these pre-formed glass reinforced plastic stair nosings are quick and easy to install; Surface preparation is minimal, simply glue or screw into place and the stairs are ready to walk on, reducing down-time.
Quartzgrip™ Anti Slip Stair Nosings are 4mm thick and 70mm wide with a 55mm drop
A cutting service is available. Simple cuts may be f.o.c. A written order (by email, post or fax) is essential before we will undertake any cuts.

The following fixings are available:
External adhesive: 310ml tube @ £5.85 each
M4.8mm x 35mm wood screws @ £19.50 per 100
Screws & plugs for concrete @ £23.40 per 100
Self tapping screws: No 8 x 20mm to suit Chequer Plate @ £26.00 per 100
Domed head bolts & fixing plates to suit open mesh grating @ £1.95 each
Drilling & countersinking @ £0.33 per hole

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

Quartzgrip™ Anti Slip Landing Covers is low profile 4mm thick, anti-slip plates with a nosing, suitable for installation onto existing concrete, timber or steel chequer plate substrates. These plates provide an extremely cost effective solution and help rejuvenate worn, slippery and tired landings
A durable quartz "Grit" is applied to the top surface which provides exceptional slip resistance BS7976 - 2 (2002).

· Easy to install
· Effective anti slip surface
· Durable & long-lasting
· Corrosion resistant
· Low maintenance

The plates are available in the following panel sizes;
2440 x 1220 x 4mm
1220 x 1220 x 4mm

Stock colour: Black with yellow nosing

A cutting service is available, with panels cut to your requested dimensions. If required fixing points can be pre-drilled, for ease of installation.

QuartzGrip™ Anti Slip Landing Covers are quick and easy to install, with minimal down time. Simply glue or screw to your existing substrate. Full Installation instructions and COSHH data sheets are available upon request. A range of rapid setting adhesives and stainless steel fixings are available at competitive prices.
A nationwide fitting service is also available. Please contact us for a quotation.

The following fixings are available:
External adhesive: 310ml tube @ £5.85 each
M4.8mm x 35mm wood screws @ £19.50 per 100
Screws & plugs for concrete @ £23.40 per 100
Self tapping screws: No 8 x 20mm to suit Chequer Plate @ £26.00 per 100
Domed head bolts & fixing plates to suit open mesh grating @ £1.95 each
Drilling & countersinking @ £0.33 per hole

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

Quartzgrip™ Anti Slip Plate is a range of low profile 4mm thick, anti-slip plates, suitable for installation onto existing concrete, timber or steel chequer plate substrates. These plates provide an extremely cost effective solution and help rejuvenate worn, slippery and tired walkways, access ramps, gangways, bridges, and industrial floors.
A durable quartz "Grit" is applied to the top surface which provides exceptional slip resistance BS7976 - 2 (2002).

· Easy to install
· Effective anti slip surface
· Durable & long-lasting
· Corrosion resistant
· Low maintenance

The plates are available in the following panel sizes;
1220 x 1220 x 4mm
2440 x 1220 x 4mm
2000 x 1000 x 4mm

Bespoke panels are available in RAL & BS colours to compliment your corporate image.
A cutting service is available, with panels cut to your requested dimensions. If required fixing points can be pre-drilled, for ease of installation. High visibility yellow hazard warning lines & logos can be applied to panels upon request.

QuartzGrip™ Anti Slip Plates are quick and easy to install, with minimal down time. Simply glue or screw to your existing substrate. Full Installation instructions and COSHH data sheets are available upon request. A range of rapid setting adhesives and stainless steel fixings are available at competitive prices.
A nationwide fitting service is also available. Please contact us for a quotation.

The following fixings are available:
External adhesive: 310ml tube @ £5.85 each
M4.8mm x 35mm wood screws @ £19.50 per 100
Screws & plugs for concrete @ £23.40 per 100
Self tapping screws: No 8 x 20mm to suit Chequer Plate @ £26.00 per 100
Domed head bolts & fixing plates to suit open mesh grating @ £1.95 each
Drilling & countersinking @ £0.33 per hole

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

TimberGrip™ low-profile coarse grit finished decking strips fit directly onto the decking surface, 4mm thick with convex surface to comply with the requirements of DDA. A quick, attractive and long-lasting solution for slippery wooden surfaces. They simply screw and glue into place. Easy to cut.

TimberGrip™ is ideal for all exterior decking, including walkways, bridges, jetties, pontoons, balconies, & platforms.

The following fixings are available:
External adhesive: 310ml tube @ £5.85 each
M4.8mm x 35mm wood screws @ £19.50 per 100
Screws & plugs for concrete @ £23.40 per 100
Self tapping screws: No 8 x 20mm to suit Chequer Plate @ £26.00 per 100
Domed head bolts & fixing plates to suit open mesh grating @ £1.95 each
Drilling & countersinking @ £0.33 per hole

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)

Tough weatherproof strips to give existing wooden decking a slip resistant surface
Designed to combine the aesthetics of conventional timber decking with an effective anti slip surface. TimberGrip™ is easy to install. Simply drop into a rebated channel within the timber decking for a flush surface. A quick, attractive and long-lasting solution for slippery wooden decking.
Ideal for marinas, parks, balconies, patio areas etc.

The following fixings are available:
External adhesive: 310ml tube @ £5.85 each
M4.8mm x 35mm wood screws @ £19.50 per 100
Screws & plugs for concrete @ £23.40 per 100
Self tapping screws: No 8 x 20mm to suit Chequer Plate @ £26.00 per 100
Domed head bolts & fixing plates to suit open mesh grating @ £1.95 each
Drilling & countersinking @ £0.33 per hole

Anti-Slip cover for 25mm ladder rungs

Phone 01380 831299 to place order.
Prices, excluding VAT and delivery:
(Delivery for up to £300 order value is £14.00, over £300 f.o.c. for all pre-paid orders only.)