Metal Primers

For use with 9100 Epoxy System

For all sound substrates
Up to 100 microns dry film in one coat
Fast drying
The best primer under severe conditions
For blasted surfaces
Two pack product
Overcoat after 16 hours and before 72 hours
Contact us for full system and preparation details

Phone 01380 831299 for data and COSHH sheets

For use with 9100 Epoxy System

Low viscous epoxy primer with outstanding adhesion on manually de-rusted metals
First class adhesion on a second class surface
Penetrates through rust onto sound metal
Economic alternative to blasting
Active corrosion control
Easy to apply by brush, roller or spray
Two pack product
Use for St2 - St3 surfaces
Recoat after 16 hours and before 72 hours
Contact us for full system details

Phone 01380 831299 for data and COSHH sheets

PHONE 01380 831299 FOR BEST PRICES

Minimal surface preparation
Unique formula based on fish oil
Penetrates the rust to the metal
Single pack - apply by brush or roller
Direct application on moist surfaces, represses moisture and air
Durable corrosion protection, both with and without topcoat
Use for manually derusted steel (St2) - Corrosion class C1 - C4
Minimum overcoat time is 24 hours at 20 degrees C. Outside generally allow 48 hours
Topcoat with Alkythane 7500 (single pack alkyd coating) or 9100 solvent based epoxy system
Colour: Red
Available in 20 litre, 5 litre and 1 litre units

Phone 01380 831299 for data and COSHH sheets

PHONE 01380 831299 FOR BEST PRICES

For bare and lightly rusted steel
Fast Dry - Recoatable after 2 hours
Durable maintenance in a single day
Low odour single pack formulation
Apply by brush, roller (add thinner 633 if required) or spray (add thinner 641 if required)

Use for:
Bare steel
Manually de-rusted steel (St3)
Coated steel, partially rusted, rust and loose parts removed to St3
All above for corrosion class C1 - C4
Overcoat with Alythane 7500 (single pack alkyd) or 9100 (solvent based epoxy)

Colour: Red (569) - Available in 20 litre, 5 litre and 1 litre units
Colour: Grey (580) - Available in 5 litre units

Phone 01380 831299 for data and COSHH sheets

PHONE 01380 831299 FOR BEST PRICES

High Build (60 microns in a single layer)
Lasting flexibility
Durable corrosion prevention (category C3-C4)
Use as primer or intermediate coat
Topcoat with Alkythane 7500

Use for:
Blasted steel (Sa2.5) - category C1 - C4
Seel with millscale - category C1 - C4
Manually derusted steel (St3) for corrosion class C3 - C4

Colour: Orange (1060) - Available in 5 litre units
Colour: Grey (1080) - Available in 20 litre and 5 litre units

Phone 01380 831299 for data and COSHH sheets

PHONE 01380 831299 FOR BEST PRICES

Primer for galvanised steel
This product must be used if you wish to apply a Rust-Oleum paint coat to galvanised steel
Also use for non ferrous metal, PVC and fibreglass (e.e. hard, smooth, non porous surfaces)
Can be re-coated after 1 to 2 hours when tacky and must be overcoated the same day - topcoat with Alkythane 7500
Coverage is 25 sq m / litre so is very economic
Available in 5 litre and 1 litre units

Phone 01380 831299 for data and COSHH sheets

PHONE 01380 831299 FOR BEST PRICES

Contains 86,5 wt. % pure zinc
Cathodic protection
Fast drying
For new, bare, blasted or galvanized steel
Ideal for repairs on galvanized steel

Use for galvanised steel - corrosion class C1 - C4
Use as a finished zinc coating - do not overcoat. If you wish to overcoat with a paint system, use Galvinoleum as a primer

Available in 5 litre units

Phone 01380 831299 for data and COSHH sheets